Product Description
The Marin Alpine Trail E2 Electric Bike is our top-end Alpine Trail, ready to tame the roughest and toughest of trails. For the best of the bunch, we’ve packed in the big-dog Shimano STEPs EP801 system and a long-lasting 630Wh battery, Fox 38/Float DHX2 Performance Elite suspension and a blend of Shimano XT and SLX 12-speed, including powerful TRP 4-piston brakes.
Key upgrades from Alpine Trail E1:
- Shimano STEPS EP801 system
- Fox 38/Float DHX2 Performance Elite suspension
- Shimano XT/SLX 12-speed drivetrain w/10-51t cassette
- TRP DH-R Evo 4-piston disc brakes
REAR SHOCK SET UP
Recommended Sag = 30%/19.5mm
Step 1: Use your finger to slide the rubber bump stop (on the shock shaft) up to the seal head.
Step 2: Sit on the bike and put all of your weight on the bike. Do *not* cycle the suspension.
Step 3: Measure sag (from shock body to bumper), If it does not match the bike’s recommended sag in millimeters repeat process, and replace coil spring with appropriate rate.
Step 4: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Quality E-Bike presented by Marin. Discover more quality E-Bike only at Rodalink Malaysia bicycle shop.